Voltage Regulator Mosfet CNC MR STATOR Triumph Street Triple R 675 200910

  

Voltage Regulator Mosfet CNC MR STATOR Triumph Street Triple R 675 2009>10. This product sheet has been automatically translated.

If you have any questions, please contact us. Cable length: 320 mm and 235 mm. Mounting holes center to center: 79 mm.

Minimum charging voltage: 14.5 V +/- 0.5 V. Maximum charging current: 50A / 500W. Operating temperature: -20° to 85°. Other information; Original reference; Description; VOLTAGE REGULATOR MOSFET CNC MR STATOR Triumph Street Triple R 675 2009>10.

MOSFET technology allows for lower operating temperatures. Red CNC aluminum body allows for better heat dissipation which, combined with the use of Mosfet components, reduces the average temperature by 33% within the first 10 minutes of use. Protection against overheating, instead of shutting down, it goes into protection mode by shutting off to cool down. Plug-and-play, direct fit, easy installation. Improved heat sink and charging capacity.

All shipped products are tested. The opposite connector (main harness side) is included as it is often melted/corroded/defective, which is a major cause of repetitive electrical problems. Minimum charging voltage: 14.5 V +/- 0.5 V VOLTAGE REGULATOR MOSFET CNC MR STATOR Triumph Street Triple R 675 2009>10 MOSFET technology allows for lower operating temperatures. Red CNC aluminum body allows for better heat dissipation which, combined with the use of Mosfet components, reduces the average temperature by 33% within the first 10 minutes of use.

The opposite connector (main harness side) is included as it is often melted/corroded/defective, which is a major cause of electrical problems.