Voltage Regulator Mosfet CNC MR STATOR Triumph Street Triple 675 2006-2014

  
Voltage Regulator Mosfet CNC MR STATOR Triumph Street Triple 675 2006>2014. This product sheet has been automatically translated. If you have any questions, please don't hesitate to contact us. Center to center mounting holes: 80 mm. Minimum charging voltage: 14.5 V +/- 0.5 V. Maximum charging current: 50A / 500W. Operating temperature: -20°C to 85°C.

Other info; Original reference; Description; VOLTAGE REGULATOR MOSFET CNC MR STATOR Triumph Street Triple 675 2006>2014. MOSFET technology that allows lower operating temperatures.

Red CNC aluminum body that allows better heat dissipation which, combined with the use of Mosfet components, reduces the average temperature by 33% within the first 10 minutes of use. Protection against overheating, instead of shutting down, it goes into protection mode by shutting off to cool down. Plug-and-play, direct fit, easy installation. Improved heat sink and load capacity.

All shipped products are tested. The opposite connector (main harness side) is included as it is often melted/corroded/defective, which is a major cause of repetitive electrical problems. Minimum charging voltage: 14.5 V +/- 0.5 V VOLTAGE REGULATOR MOSFET CNC MR STATOR Triumph Street Triple 675 2006>2014. MOSFET technology that allows lower operating temperatures. Red CNC aluminum body that allows better heat dissipation which, combined with the use of Mosfet components, reduces the average temperature by 33% within the first 10 minutes of use.

The opposite connector (main harness side) is included as it is often melted/corroded/defective, which is a major cause of electrical problems.