- Triumph Street Triple
- Brand
- Avdbmoto (16)
- Brazoline (6)
- Danmoto (12)
- Delkevic (14)
- Exan (34)
- F & F Carbon (10)
- Gb Racing (5)
- Gpr (28)
- Grmoto (7)
- Gstradingonline (10)
- Hp Corse (9)
- Jaybeebikerbits (14)
- Mivv (10)
- No Brand / Generic (8)
- No Brand / Generic - (44)
- R & G (6)
- R & G Racing (6)
- Triomphe (8)
- Triumph (263)
- Zard (17)
- Other (4067)
- Length
- Material
- Shape
- Sub-type
- Type
- Alternateur Complet (3)
- Bras Oscillant (7)
- Cadre Et Carrosserie (14)
- Carénage (5)
- Complete Swing Arm (4)
- Démarreur (3)
- Echappement (43)
- Electricité (5)
- Exhaust (15)
- Fork Tube (4)
- Garde-boue (23)
- Jante Arriere (5)
- Kit Chaine & Pignon (3)
- Moteur (8)
- Muffler (7)
- Partie Cycle (8)
- Piece (22)
- Protection Moteur (5)
- Radiateur (12)
- Radiator (8)
- Other (4390)
Suitable for Triumph Street Triple 1050 2011 Carbon Fender 50803410
Suitable for Triumph Street Triple 1050 2011 Carbon Mudguard 50803410. This product sheet has been automatically translated.
If you have any questions, please feel free to contact us. Here we offer a high-quality carbon rear wheel trim for the Street Triple 1050 from 2011.The finish and details speak for themselves, carefully painted (with UV protection) and hand-polished for a high gloss. 100% without carbon look, without carbon foil. It is real carbon fiber that is used. Fairing parts should always be installed by a specialized workshop, as with a carbon part you are replacing a static part with a flexible plastic part; there may be small or slight adjustments!
All items in stock and available for immediate delivery. Verified member and strong seller. Please also visit us on our homepage. TÜV report: The material we use has been approved by a TÜV report with NO. 113XS0096-00 dated TUV The Rheinland Testing Center Cologne has checked for safety against splintering, with positive results and is classified as splinter-resistant.Many products already have an ABE (general operating permit) and do not require registration. Please inquire here on a case-by-case basis, as the list is constantly being updated and expanded.
We have here a high-quality carbon rear mudguard for the 2011 Street Triple 1050. It is well manufactured and extensively coated (including UV protection). All our parts are hand-polished. This product contains real carbon fiber. 100% quality product, easy to change.Fairing parts should always be assembled by a specialized workshop. Since you are replacing a static carbon part with a flexible plastic part, this may result in moderate adjustments.
TÜV inquiry: The materials we use are highly confirmed by an inquiry no. 113XS0096-00 from the "TÜV Rheinland Testing Center Cologne". Our materials have been tested for impact resistance. The result was positive and the materials were classified as unbreakable.
Many of our products already have an "ABE" and do not need to be registered. 113XS0096-00 datedTUV The Rheinland Testing Center Cologne has checked for safety against splintering, with positive results and is classified as splinter-resistant.
The result was positive and the.