Also available directly on our online store. Box in destocking - reduced price -35%.
Dynojet introduces the power commander 5, the successor of the power commander 3 usb. The power control unit 5 is an injection control unit, which connects in series with the original unit or the injectors of the motorcycle, without any modification to be made on the harness of your motorcycle.
It allows to redefine the mapping of your injection according to the configuration of your motorcycle pot racing, air filter kn, modified camshaws ..., compared to the original mapping (even on a motorcycle without modification, full Stock, you can optimize your injection compared to the original settings). Interest of the power control v: it allows to obtain the best air / fuel ratio possible so that the motor efficiency is optimum, whatever the throttle position and the engine speed, depending on the configuration of your motorcycle and Its use track, road ... In use, this is felt by an increase in driving pleasure less brutal injection, holes accelerated gummed ..., better acceleration and better engine behavior.Installation of the power commander: the power commander is installed on the original connectors (no wire to be cut / welded), and therefore remains simple to install. It is delivered with its explanatory notice.
Characteristics of the power control 5: - better map settings with adjustment of -100 to + 250% on the fuel injection (-100 to +100 only on the power commander 3) - adjustment by cylinder - 2 inputs for the shifter , 1 input speed (for info ratio engaged and speed and adjust the map based), 1 analog input application temperature, turbo, noos ... 2 ports extensions to connect optional accessories autotune, lcd display, sfm ...
Usb port Self-powered (the box connects directly to your computer without battery, to recover the maps via the supplied software) - 10-column table for gas openings (against 9 on the pciii) - note function The maps to recognize them). Setting a power commander: The power commander is delivered with a cd rom containing the power command control center software, as well as map files ready to install. As well as on the website of the constr. There is a wide choice of maps to load and try according to your configuration. The numbering of the maps is based on six characters (eg 308-507), the first three digits corresponding to the motorcycle (eg 308 = gsxr 1000 k1), the 4th digit in the geographical area (0 = Us, 5 = europe, 9 = france), then the last two digits to the accessories taken into account in the map.
For the setting, you can: - use one of the many maps already available to you. You will find your happiness if you have a "standard" silent configuration, air filter ... If you really want the map corresponding to your motorbike, or if you have further modifications (camshaft, modified airbox) , It will be necessary in this case rather to make realize a maping specific and personalized to your case.
This requires a power control tuning center equipped with the right equipment to support your motorcycle and optimally configure it with the tuning link software. You can also use an auto tune for auto tuning. (These centers have a dynojet power bench with gas analyzer and technician with specific training). Air filter racing: we can deliver your power commander with an air filter racing dna or kn, please contact us.
Not approved on the road. It is therefore reserved for use on a closed track.
The version on sale here is compatible with. The item "power control v triumph 675 street triple 2013-2015" is on sale since Thursday 27 July 2017. It is in the category "vehicles \ parts, accessories \ motorcycles \ accessories \ other". The seller is "tech2roo" and is located in dreux.
This item can be shipped to the following countries: European Union.