Plate Bracket Triumph Street Triple 675 800 And Daytona 675

  
Plate support, triumph triple street triple 675 - 800 and daytona 675 wheels. The flat plate support brings the futuristic touch. It has been developed to keep the necessary functions to your vehicle. The possibility of turning the lights and lighting l.

The fastening, ultra reinforced is in steel thickness of 5. Mm, reinforced by folds to rigidify the whole support plate against the vibrations.

It is placed on the axis of the wheel of the oscillating arm. The arm part is aluminum thickness 5.

The functionality of the wheel support is aluminum thickness 3. It has been curved to match your tire, this avoids splashing the passenger and also the driver. The position can be used to set the number plate and the flashing lights and illumination l. The entire wheel mounting bracket is coated with a high quality matte black epoxy paint, weatherproof and stone impact resistant. A black obturator, study to the shape of the hole in your wheel arch (location of the original plate support) and provided.

This avoids the infiltration of water. All French or foreign license plates are adaptable on the flat plate plate. The plate support, flush and road safety compliant that says the plate must be greater than 30 cm from the ground. You can take the example of the ducati diavel whose license plate and originally mounted in plate support flush with the wheel. 1 fixing in reinforced steel thickness 5mm.

1 aluminum arm of thickness 5. (lobturator is to be used to plug the hole of the plate support of origin). 12 heat shrinkable connectors (clamp) for connecting the illumination l.

D and your turn signals. The connectors are connected to the main harness and behind the arm of the flange plate support. (Keep the original plugs of your turn signals and lighting plate, cut the electrical lines 15 centimeter after the original connector). 9 black nuts to be used on the wheel flange and the swingarm attachment once the two parts have been assembled.

9 black covers for fhc countersunk head screws to be used on the wheel flange and the swing arm attachment once the two parts have been assembled. 2 cables of different colors of 1 meter each to connect the lighting l.

4 cables of different colors of 1 meter each for the connection of the turn signals. 1 braided sheath of 1.10 meters for the passage of electric cables, supplied with riselants. (The turn signals are not supplied). The whole product changes the style of your motorcycle.

The sober and futuristic style brings out the aggressive lines. Lick wheel plate holder for triumph street triple 675 - 800 and daytona 675. The flat support "wheels" brings the futuristic touch. It has been developed to keep the necessary functions to your vehicle.

The possibility of turning the turn signals and the approved illumination l. The fixing, ultra-reinforced in thickness of 5. Mm, reinforced by folds to rigidify the whole support plate against the vibrations. It is placed on the wheel of the oscillating arm.

The functionality of the flush wheel is in thickness 3. It has been curved to match your tire, this avoids splashing the passenger and also the driver. The location allows you to turn the lights on and off.

The entire flange plate is coated with high quality matte black epoxy paint, weatherproof and impact resistant. A black obturator, study to the shape of the hole in your wheel arch and provided. This prevents the infiltration of water. All French or foreign license plates are adaptable to the flat plate flush with the wheel. The plate holder, flush wheel and comply with regulations for road safety which said that the plate must be greater than 30 cm from the ground.

You can take the example of the ducati diavel whose license plate and mounted originally flush wheel support plate. 1 plate holder "wheel of ras". 1 reinforced with steel mounting 5mm thick. (the shutter is to be used to plug the hole of the original plate holder). 12 shrink crimp connectors (clamp) for connecting led lighting and your turn signals. The connection of the connectors is on the hand wiring loom and behind the arm of flush wheel support plate.

(Centimeters after the original connector). 9 black caches nuts use the wheel and flush mounting of the swing arm the two parts together.

2 cables of different colors of one meter each for connecting led lighting. 4 cables of different colors of one meter each for connecting flashing. 1 braided sleeving of 1.10 meters for the passage of electrical cables provided with riselants. (Turn signals are not supplied). The whole product changes the style of your bike.

The sober and futuristic styling highlights the aggressive lines. The item "triumph street triple bracket plate bracket 675 800 and daytona 675" is for sale since Tuesday 18 July 2017. It is in the category "vehicles \ parts, accessories \ motorcycles \ Spare parts \ bodywork, Plate holders ". The seller is "motor-stainless" and is located in / in lyon.

This item can be shipped to the following countries: america, europe, asia, australia.

1. brand: access design
2. motorcycle brand: triumph
3. model: street triple 675 - 800, daytona 675
4. part number manufacturer: splrt001
5. color: black
6. location on the bike: rear of the tire
7. unit type: unit
8. unit quantity: 1
9. manufacturer warranty: 1 year
10. country of manufacture: france
11. other part number: splrt001
12. support, plate, triumph, street triple,: 675, 800, daytona, lick, wheel,